Overview

Coo-Var Suregrip® has been formulated to provide a rough, anti-slip floor coating that helps prevent slips and falls in areas with foot and light truck traffic. This ready-mixed floor paint is ideal for suitably primed concrete, wood, metal and GRP which provides a rough, anti-slip finish when dry. The added aggregate makes it suitable for indoor and outdoor use it provides a durable, coloured finish on boats, steps and stairways, disabled ramps, doorways, and more.

• Available in a range of colours
• Provides a rough, anti-slip finish on floors
• For foot and light truck traffic use
• Aggregated finish to enhance safety by reducing the risk of slips and falls
• Suitable for indoor and outdoor use

Preparation

All surfaces should be clean, dry, and sound ensure to thoroughly sweep the floor to remove any debris.

• Concrete surfaces including power floated, granolithic and smooth surfaces should be abraded to create a key. Either sand the surface or use to prepare the surface.
• New concrete must be allowed to cure for 3 months, apply a 10% thinned coat of to prime and seal the surface prior to applying Coo-Var Suregrip®.
• Other surfaces have to be prepared and primed with the suitable primer for that substrate.
• Previously painted surfaces should be cleaned, degreased, and sanded to create a key.
• Remove all loose and flaking material to leave a smooth surface.
• Treat any knots or staining with an appropriate stain blocker.

Application

We recommend always performing a test on the surface to be painted to ensure you are happy with the finished results.

• Stir well before use and apply using a brush or short/medium roller.
• Recoat in 16 hours and hard dry in 24 hours.
• It will achieve full hardness in 5-7 days.